彩神彩票

Please leave a message

 V-6500d injection valve

V-6500d injection valve

Spray dispensing system is axxon's ace product, which integrates high precision, high consistency dispensing and strong process control capability.

Axxon injection valve can be equipped with any automation system to achieve a variety of high-speed dispensing process to meet the diverse dispensing needs of customers. The v-6500d non-contact spray dispensing valve can realize the dispensing of various fluids and adhesives with high speed and controllable capacity. Axxon injection valve can not only spray in a narrow space of 100 microns, but also accurately dispensing 0.01 mg in the designated position. It is widely used in SMT, FPC & PCBA assembly industry, LED packaging industry, energy industry, electroacoustic industry, life science, optics, MEMS, RFID and other occasions requiring high precision, high efficiency, non-contact and space limitation.

Note: with c-160g controller, it can be integrated into any motion platform


Product characteristics

•  Non contact injection

•  high speed

It needs z-axis movement, and the highest spraying speed is 200 points / s, which is 3-7 times of contact dispensing;

•  high-precision

The minimum dispensing amount is 5nl, and the consistency is higher than contact dispensing;

•  High flexibility

Non contact, avoid the collision between the needle and the product; extremely small amount of glue, suitable for more compact space.

•  Low maintenance and high life

Advanced structural design, daily cleaning and maintenance is simple and easy; the most advanced nano wear-resistant material accessories, more than 20 times the life of ordinary materials.

•  Own independent intellectual property rights

•  Constant temperature system of flow channel and nozzle ensures the consistency of glue temperature

•  Adjust preload and stroke independently


 V-6500 application 900x300.jpg


Focus on Application

•  Bottom fill •  Pin encapsulation •  Precision coating •  Bangding •  Sealing •  Potting •  Dam & fill


Suitable for fluids            

•  Bottom filler •  Sealant •  Epoxy adhesive •  UV glue •  Conductive adhesive •  Silver paste •  Red glue

•  Surface mount adhesive •  Coating adhesive •  Ink •  Silicone oil •  Biological enzyme


Specification parameters

Basic parameters

V-6500D

Size (L * w * h)

111.5*42*148mm

weight

600 g

Minimum driving pressure

0.55Mpa

Maximum operating frequency

250 cycles/s

Optimum feeding pressure

0.05 ~ 0.3 Mpa

Minimum point diameter

0.2 mm (depending on glue)

Optimum viscosity range

1 ~ 200000cps

Main body

stainless steel

Fluid channel

stainless steel


(*) is required
*
*
*
*
*
*
*
*

I have read and agree Privacy protection

(*) is required
*
*
*
*
*
*

I have read and agree Privacy protection

Email login Mobile login
Mobile login Email login
Email password recovery
Change personal password
Password changed successfully, please login again!